How Should I Link The Ai/Di Alarm With The Alarm Beacon Over The Ecc800 Webui - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
After the smoke alarm is linked with the alarm beacon, if smoke is detected inside the smart
module, the alarm beacon connecting to the corresponding DO2 port will generate an audible
and visual alarm.
Procedure
Step 1 Choose System Settings > Alarm Parameter > Alarm Linkage.
Step 2 Select Multi-Func Sensor for Device Type, select Device Type or Device for Linkage type,
and click Confirm.
Step 3 Click Select in the Output Dry Contact list for Smoke alarm. On the Set Dry Contact
Outputs(Multi-Func Sensor) page, set DO2 to Yes and click OK.
Step 4 Click Select in the loudspeaker list for Smoke alarm. On the Please set the
sound(Multi-Func Sensor) page, set loudspeaker to Yes and click OK.
----End
8.1.38 How should I Link the AI/DI Alarm with the Alarm Beacon
over the ECC800 WebUI
Prerequisites
The alarm beacon is connected to the DO port on the ECC800.
Context
After the AI/DI alarm is linked with the alarm beacon, if smoke is detected inside the smart
module, the alarm beacon connecting to the corresponding DO port will generate an audible
and visual alarm.
This section describes how to set an alarm linkage by linking output dry contact of the smoke
DI alarm on the AI/DI_1 sensor to the DO2 port.
Procedure
Step 1 Choose System Settings > Alarm Parameter > Alarm Linkage.
Step 2 Select ECC800 for Device type, select Device Type or Device for Linkage type, and click
Confirm.
Step 3 Click Select in the Output Dry Contact list for AI/DI_1 DI alarm. On the Set Dry Contact
Outputs(ECC800) page, set DO2 to Yes and click OK.
Step 4 Click Select in the loudspeaker list for AI/DI_1 DI alarm. On the Please set the
sound(ECC800) page, set loudspeaker to Yes and click OK.
Issue 05 (2019-09-16)
Select Multi-Func Sensor n from the Device Name list if you have selected Device for Linkage type,
and click Confirm.
Select ECC800 from the Device name list if you have selected Device for Linkage type, and click
Confirm.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
250