Huawei ECC800 User Manual page 126

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Log in to the camera WebUI.
1.
2.
Step 2 For details about how to commission IP cameras and set parameters for them, see the
documentation delivered with the equipment or obtain the documentation by referring to the
"Preparing Documentation" section.
1.
2.
3.
Set coding protocol to H.265.
Issue 05 (2019-09-16)
Configure the PC IP address and the camera IP address in the same network segment.
Enter the camera IP address (192.168.0.120 by default) in the address bar of the Internet
Explorer and press Enter button.
The following lists the requirements of the operating system and browser for logging in to the camera
through the WebUI.
 Windows 7: Internet Explorer 8/9/10/11. Chrome 32+, and FireFox 35–51
 Windows 8: Internet Explorer 10/11, Chrome 32+, and FireFox 35–51
Windows 10: Internet Explorer 11, Chrome 32+, and FireFox 35–51

 Google Chrome 45 or later versions need to install the Internet Explorer tab plug-in.
 Only 32-bit web browsers are supported.
Enter the preset user name admin and the preset password HuaWei123, and click Log
In.
Preview the site situation in real time and check the camera coverage through videos.
Adjust the lens if necessary.
Choose Settings > Network Configuration > Network Parameters, and set IPv4
address, IPv4 Subnet mask, and IPv4 Gateway address for the camera according to
the site plan.
Choose Settings > Video/Audio/Image > Video Settings, and set IP address, Subnet
mask, and Gateway IP address for the camera according to the site plan.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
116