Battery Management; Setting Ibox And Ibat Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Step 2 Choose Home > Plan View to view real-time PUE data.
Figure 6-35 Viewing real-time PUE data
Step 3 Choose Query > Performance Data to view historical PUE data.
1.
2.
----End

6.5 Battery Management

If iBOXs and iBATs are configured, perform the following steps to commission them.

6.5.1 Setting iBOX and iBAT Parameters

Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Monitoring > Power Distribution > iBOX/CIM > Running Parameters.
Issue 05 (2019-09-16)
Choose Device, Performance data, Start time, End Time, and the display mode (table
or curve) of the PUE parameter as required.
Click Query.
 The 17:00:00 data includes the data from 17:00:00 to 18:00:00.
 If the query time is between 18:00:00 and 19:00:00 and the time has not arrived at 19:00:00 yet, then
the displayed time is 18:00:00 and the data includes the data from 18:00:00 to the query time.
Figure 6-36 Viewing historical PUE data
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
137