Huawei ECC800 User Manual page 35

ECC800 Data Center Controller
User Manual
Figure 3-6 Smart ETH gateway
(1) PWR_IN
cascading power port
(5) 48V_OUT1
power output port
(9) BLINK button
Specifications
Table 3-16 Technical specifications for a smart ETH gateway
Item
Power input
Power output
FE port
POE port
BLINK
button
Issue 05 (2019-09-16)
(2) FE_1 cascading
signal port
(6) 48V_OUT2
power output port
(10) Status indicator
Specifications
PWR_IN D-type power input terminal, for power cascading, input voltage
range: 45–55 V DC
Power of a single smart ETH gateway: max (2.7 A , 48 V DC); power of
cascaded smart ETH gateways: max (25 A, 48 V DC)

PWR_OUT D-type power output terminal, for power cascading, output
voltage range: 45–55 V DC
 48V_OUT1 and 48V_OUT2, terminal (1 A,48 V DC), output voltage
range: 45–55 V DC
Two FE ports, RJ45 terminal with an indicator, 10/100M communication
rate, for the cascading between smart ETH gateways and the
communication with the upper computer
Four POE ports, RJ45 terminal with an indicator, 10/100M
communications rate, complying with IEEE802.3, IEEE802.3u,
IEEE802.3af/at
If you press the BLINK button, the RUN indicator blinks intermittently at
super short intervals (blinking at super short intervals for 0.5s and then off
for 0.5s) for 5 seconds.
Copyright © Huawei Technologies Co., Ltd.
(3) POE_1–2 (4) POE_3–4 ports
ports
(7) FE_2 (8) PWR_OUT
cascading signal cascading power port
port
3 Device Description
25