Huawei ECC800 User Manual page 200

ECC800 Data Center Controller
User Manual
Step 2 Add a PDU2000.
1.
2.
Table 8-7 Adding a PDU2000
Path
Choose System
Settings >
Device
Management
and click Add
Device. The
parameters for
adding devices
are displayed.
Issue 05 (2019-09-16)
The display of a single-phase module is used as an example.
− After the PDU2000-M (H) is powered on, press MENU. The LCM displays
.
− Press MENU again to access the device communications address screen.
Figure 8-15 PDU2000-M (H) communications settings
− Press DOWN and UP to select the address to be set.
− Press MENU to confirm the settings.
If modification is successful,
displayed:
Log in to the ECC800 WebUI as an administrator.
Add a PDU2000.
Parameter
Name
Device attribute
Device Type
Connect To
Communications
Port
Device Address
Copyright © Huawei Technologies Co., Ltd.
is displayed: If modification fails,
Setting
Select PDU from the drop-down list box.
Select PDU2000-M (C) or PDU2000-M (H) from
the drop-down list box based on the actual device.
Select ECC800 from the drop-down list box.
Select COM1 from the drop-down list box.
NOTE
The setting example indicates that the PDU2000 is
connected to the COM1 port on the ECC800. If the
PDU2000 is connected to another port, enter the number
of the connected port.
Enter the actual device address of the PDU2000.
8 FAQ
is
190