How To Restore Factory Settings; How Do I Install A Network Security Certificate - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

8.1.9 How to Restore Factory Settings?

Context
Restoring factory settings will restore parameters to their default values. Perform this
operation with caution.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Maintenance > Configuration File and click Restore Factory Settings.
Step 3 Enter the password currently used for logging in to the WebUI and click Submit.
----End

8.1.10 How Do I Install a Network Security Certificate?

Context



Procedure
Step 1 Log in to the ECC800 WebUI as the administrator.
Step 2 Upload a network security certificate.
1.
2.
3.
4.
5.
6.
7.
8.
----End
Issue 05 (2019-09-16)
You have copied a network security certificate and its key you obtained to the PC.
Install a network security certificate if a security certificate problem message is
displayed when you attempt to log in to the ECC800 WebUI.
You need to apply to an organization authorized by the customer for a network security
certificate and its key with the ECC800 IP address or domain name. This section
describes how to import the certificate and key.
Choose System Settings > System Parameters > Site Configuration.
Select a certificate format from the drop-down list box in the Network Security
Certificate area.
Click Select File on the right of Select a network security certificate.
Select the network security certificate to be imported from the PC and click Upload.
Click Select File on the right of Select a network security certificate key.
Select the network security certificate key to be imported from the PC and click Upload.
(Optional) If the network security certificate is encrypted, select If an encrypted private
key is imported, enter the password for decryption, and specify Key cryptography
and Confirm key cryptography.
Click Submit in the Network Security Certificate area.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
228