Third-Party Nms Management (Over Snmp); Connecting A Communications Cable; Setting Snmp Management Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Figure 6-65 Page for managing transparent transmission channels
----End

6.14.2 Third-party NMS Management (over SNMP)

6.14.2.1 Connecting a Communications Cable

Procedure
Step 1 Connect a communications cable to the WAN1 port on the ECC800-Pro.
Figure 6-66 Connecting a communications cable
----End

6.14.2.2 Setting SNMP Management Parameters

Prerequisites
Before setting SNMP parameters, obtain the information listed as follows from the NMS.
Table 6-50 Information obtained from the NMS
Item
Issue 06 (2020-04-22)
Default
Value
Copyright © Huawei Technologies Co., Ltd.
Description
6 Feature Description
207