Huawei ECC800 User Manual page 254

ECC800 Data Center Controller
User Manual
Context
Figure 8-31 Network diagram
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Add the device.
Table 8-42 Parameter description for adding a device
Path
Monitoring >
System >
ECC800 >
Running
Parameters >
AI/DI_1 Port
Settings
NOTE
Step 3 After setting all mandatory parameters, click Submit.
----End
Follow-up Procedure
Choose Home > Plan View on the ECC800 WebUI, and drag the device to the corresponding
position in the Smart Module View pane based on the actual device layout.
Issue 05 (2019-09-16)
Parameter
AI/DI_1 sensor
AI/DI_1 sensor
type
The setting example
indicates that the
AI/DI_1 power
device connects to
supply
the AI/DI_1 port on
the ECC800. If the
device connects to
another port, enter
the number of the
connected port.
Copyright © Huawei Technologies Co., Ltd.
Setting
Select Enable and click Submit
Select the type of the device to be accessed from
the drop-down list box.
NOTE
The device types (excluding normal open and normal
close) can be automatically identified for devices
except for door sensor and leak sensor (Electroc) after
connection.
The default value is Enable.
8 FAQ
244