Huawei ECC800 User Manual page 27

ECC800 Data Center Controller
User Manual
Indica
tor
ALM
RF_Z
3G
Table 3-6 PSU indicator description
Indicator
Issue 05 (2019-09-16)
Color Name
Red Alarm
indicator
Green Communicati
on status
indicator
Green 3G status
indicator
Colo Name
r
Gree Power
n indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
NetEco successfully.
Blinking at The ECC800 does not register
short with the NetEco (the indicator
intervals blinks at 4 Hz, on for 0.125s and
then off for 0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Steady on No network parameters exist, or
a network is to be created.
Blinking at A network is set up, and no node
long access is allowed (the indicator
intervals blinks at 0.5 Hz, on for 1s and
then off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Steady on The 3G module is powered on.
Off The 3G module stops running, or
no 3G module is configured.
Blinking at The 3G module succeeds in
long dial-up (the indicator blinks at
intervals 0.5 Hz, on for 1s and then off for
1s).
Blinking at The 3G module registers with the
short operator network successfully
intervals (the indicator blinks at 4 Hz, on
for 0.125s and then off for
0.125s).
Status Description
Steady on The converter has a power input.
Off The converter has no power input or
is faulty.
Blinking at The converter is being queried (the
long intervals indicator blinks at 0.5 Hz, on for 1s
3 Device Description
17