Huawei ECC800 User Manual page 119

ECC800 Data Center Controller
User Manual
Device
Camera
VCN
Procedure
Step 1 Connect a network cable between the PC network port and the LAN_1 port (protected by a
security mechanism) on the ECC800.
Step 2 Set the IP address for the IPC6325 camera.
1.
2.
3.
4.
Step 3 On the ECC800 WebUI, click Add under Video Information. In the New Video
Information dialog box that is displayed, enter camera/VCN information.
Issue 05 (2019-09-16)
Internal IP Address
Example: 192.168.248.50; range:
192.168.248.50–192.168.248.199
Example: 192.168.248.51; range:
192.168.248.50–192.168.248.199
Enter https://192.168.248.10 in the address box of the browser and press Enter to access
the WebUI login page. After login, choose System Settings > Video Management and
click Search.
The search timeout interval is 10s. If the search fails, a search failure message is displayed.

 To avoid missing cameras, perform Search for multiple times.
On the found camera record, click
based on the external IP address allocated by the network administrator.
Click the link under Link (PC IP address and camera external IP address should be in the
same network segment) to access and log in to the camera WebUI. Enter the preset user
name admin and preset password HuaWei123, and click Login
Figure 6-6 Clicking the camera access link
Choose Settings > Basic Configuration > Network Parameters, set Way to obtain IP
to Use the following IP address and set an IP address to the planned IP address for the
camera. The IP address should be in the range of 192.168.248.50 to 192.168.248.199.
Copyright © Huawei Technologies Co., Ltd.
and set the external IP address for the camera
6 Feature Description
External IP Address
Camera external IP
address
VCN external IP address
109