Third-Party Nms Management (Over Snmp); Connecting A Communications Cable; Setting Snmp Management Parameters - Huawei ECC800-Pro User Manual

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
●
●
Figure 6-87 Page for managing transparent transmission channels
----End

6.14.2 Third-party NMS Management (over SNMP)

6.14.2.1 Connecting a Communications Cable

Procedure
Step 1 Connect a communications cable to the WAN1 port on the ECC800-Pro.
Figure 6-88 Connecting a communications cable
----End

6.14.2.2 Setting SNMP Management Parameters

Prerequisites
Before setting SNMP parameters, obtain the information listed as follows from the
NMS.
Issue 02 (2020-09-07)
If Connection mode is set to Compatible, click Confirm.
NO TE
On the ECC800-Pro WebUI, Enable Security Authentication is set to Disable.
If Connection mode is set to Security protocol, enter the value of Confirm
password that has been set on the ECC800-Pro WebUI, and click Confirm.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
241