Viewing The Power Supply Links Diagram - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
4.
5.
Step 2 View the power information on the ECC800 app.
1.
2.
3.
----End

6.7.4 Viewing the Power Supply Links Diagram

Procedure
Step 1 Connect the pad to the WiFi network of the ECC800 in the room.
Step 2 Log in to the ECC800 app as the administrator.
Step 3 View the power supply status of the smart module and basic information about each device in
real time to quickly locate faults.
Issue 05 (2019-09-16)
Choose Monitoring > System. In the Power Information area on the Running Info tab
page, you can view the power information about the smart module.
Choose Home > Plan View. In the PUE area, you can view the transient mPUE.
 Transient mPUE = Total input power/Total IT power of the smart module. For example, if a
PDU8000 with the total input power of 5 kW connects to the smart module, whose total IT power is
3.6 kW, the transient mPUE = 5 kW/3.6 kW = 1.39.
 If the power management is not configured, the PUE area in Plan View displays the average PUE.
Connect the pad to the WiFi network of the ECC800 in the room.
Choose Home > Power to view the proportion of used power for each cabinet.
Choose Home > Resource > Power to view the real-time power and rated power for the
entire smart module as well as the real-time power for each cabinet, and check whether
the used power exceeds the alarm threshold.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
146