Huawei ECC800 User Manual page 204

ECC800 Data Center Controller
User Manual
Procedure
Step 1 Set the PMAC625 communications address.
1.
2.
3.
Step 2 Add a PMAC625.
1.
2.
Issue 05 (2019-09-16)
Press on the displayed screen after the PMAC625 is started. Press
entering the programming mode. Modify the password (1 by default) in blinking ones
digit by pressing
Figure 8-17 Programming screen of the PMAC625
Enter the communications address setting screen by pressing
to confirm the setting.
Select the place of the communications address value to be modified by pressing
or , modify the communications address value (ranging from 1 to 247) by pressing
or , and then press
Figure 8-18 Communications address of the PMAC625
Log in to the ECC800 WebUI as an administrator.
Add a PMAC625.
Copyright © Huawei Technologies Co., Ltd.
or , and press
to save the setting.
to confirm the setting.
or
8 FAQ
after
, and press
194