Setting Parameters On The Vcn Ivs Client - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
4.
5.
----End
Follow-up Procedure





6.2.6 Setting Parameters on the VCN IVS Client

Prerequisites
The network communication between the VCN and the camera is normal.
Procedure
Step 1 Install the VCN IVS client.
1.
Method 1
Method 2
Issue 05 (2019-09-16)
Figure 6-24 Configuring Camera NTP Synchronization
In the search results, click Edit in the row where Parameter Name is NTPIPC and set
Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the camera, after
being connected to the server, will automatically time-synchronize with the server.
The VCN automatically restarts after the IP address is modified. The restart takes about 5
minutes. After the restart, use the new IP address to access the VCN.
Change the PC IP address to an address in the network segment of the new VCN IP
address, enter the VCN IP address in the address box of the Internet browser, and log in
to the OMU Portal system.
(Optional) Deploying IVS in Stack Mode. For details, log in to the http://e.huawei.com/,
search for the VCN product documentation, open the documentation, and see the section
(Optional) Deploying IVS in Stack Mode.
(Optional) Deploying MPUs in Cluster Mode. For details, log in to the
http://e.huawei.com/, search for the VCN product documentation, open the
documentation, and see the section (Optional) Deploying MPUs in Cluster Mode.
For the VCN500, search for VCN500 Product Documentation. For the VCN540, search for
VCN510&VCN520&VCN540 Product Documentation.
Download the VCN IVS client.
You can obtain the VCN IVS in either of the following ways:
Obtain the HW_IVS_Client.exe file from the software CD-ROM delivered
with the VCN.
1. Log in to the VCN OMU Portal, choose Local Configuration > Basic
Configuration, and view Current version.
2. Log in to http://support.huawei.com/enterprise/. Choose TECHNICAL
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
123