Huawei ECC800 User Manual page 112

ECC800 Data Center Controller
User Manual
Issue 05 (2019-09-16)
Figure 6-1 Adding access users
On the Authorization Information and Term of Authorization tab pages, select access
users whose access permissions are to be set, and set Authorized Device, Authorization
Mode, Cabinet Lock, Start time, and End time.
− Access Actuator: Select the authorized access actuator for the user based on the
actual requirements. For example, select Access Actuator1 on the Access Actuator
tab.
− Authorization mode: Select Card, Fingerprint, Card and password, Card and
fingerprint, Fingerprint and password, or Card, password and fingerprint
If the access actuator version is V139 or later, the access actuator supports the authentication mode

by card, password, or fingerprint.
To query the access actuator version, choose Maintenance > Version Information. View the
version in the Device Version list.
 If you set the authorization mode to Combination, for example, card, password and fingerprint,
you need to first swipe your card, enter the password, press the pound key (#), and then enter the
fingerprint. The door can be opened only after verification of all the three items is successful.
 If you set the authorization mode to Card, Password or Fingerprint, when you use the password to
enable the access control, enter the password in the format of user ID*password#. If you enter an
incorrect password or user ID, press * on the keyboard of the access controller to stop the
authentication process. Then, enter user ID*password#.
To query the user ID, log in to the ECC800 WebUI as an administrator. Choose System Settings >
Access Management. In the Authorization area, view the user ID corresponding to the user name.
 The fingerprint information is used only for configuring the access control function and is not used
for other purposes. The fingerprint information is encrypted during transmission in the ECC800 to
ensure that the personal data of users is fully protected.
− Cabinet lock: Select a type on the Cabinet Lock tab page, for example, Smart
module > IT Cabinet1 > E–LOCK1.
− Permission validity period: Set Start date, Expiration date, and Allow door open
period.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
102