How To Set And Add A Netcol5000-A010 Parameters(Over Mac-Modbus); How Do I Set Netcol5000Cf_110Half Parameters (Modbus-Tcp) - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
8.1.8.17 How to Set and Add a NetCol5000-A010 Parameters(over
MAC-Modbus)?
Prerequisites
One end of the straight-through cable has been connected to the FE port on the
NetCol5000-A010 main control board, and the other end has been connected to the POE port
on the ETH converter.
Procedure
Step 1 Set the running parameters and control parameters for the NetCol5000-A010 on the ECC800
WebUI.
1.
2.
3.
4.
After the smart cooling product is shut down, the temperature of the smart module increases
and data running is affected. Exercise caution when performing this operation.
----End

8.1.8.18 How Do I Set NetCol5000CF_110HALF Parameters (Modbus-TCP)?

Prerequisites
Connecting a straight-through cable from the NetCol5000CF_110HALF to the POE port on
the smart ETH gateway is used as an example here.
Context
The chilled water smart cooling product is displayed as NetCol5000CF_110HALF on the
ECC WebUI and the corresponding smart cooling product is NetCol5000-C(030, 032).
Procedure
Step 1 Set the NetCol5000CF_110HALF monitoring parameters.
1.
2.
Issue 05 (2019-09-16)
Log in to the ECC800 WebUI as an administrator.
Choose Monitoring > Cooling > NetCol5000-A0101.
 0101 in NetCol5000-A0101 is variable and subject to change with the smart cooling product model
and connection sequence. The displayed value prevails.
On the Running Parameters tab page, set running parameters.
On the Controls tab page, set the smart cooling product control parameters (such as
on/off control parameters).
Enter the home page, click Settings, select user name Admin, enter password 000001,
and click Log In. The NetCol5000CF_110HALF settings page is displayed.
Choose Settings > Comm Settings > IP Settings, set IP assigning mode to Automatic
(DHCP), and click Submit.
Copyright © Huawei Technologies Co., Ltd.
8 FAQ
203