ECC800 Data Center Controller
User Manual (for ECC800-Pro)
----End
6.9 Battery Management
If iBOXs and iBATs are configured, perform the following steps to commission them.
6.9.1 Setting iBOX and iBAT Parameters
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose Monitoring > Power Distribution > iBOX > Running Parameters.
Step 3 Click Unhide All Advanced Signals, set iBOX single battery qty., Batt. installation time,
Single battery capacity, Current source, and Battery string No.. Retain default values for
other parameters.
Table 6-38 Setting iBOX parameters
Parameter
iBOX single
battery qty.
Batt installation
time
Single battery
capacity
Issue 06 (2020-04-22)
If the query time is between 18:00:00 and 19:00:00 and the time has not arrived at 19:00:00 yet, then
the displayed time is 18:00:00 and the data includes the data from 18:00:00 to the query time.
Figure 6-46 Viewing historical PUE data
Description
Total number of batteries monitored by
the iBOX
Actual time at which batteries are
installed
Single battery capacity refers to the
capacity of a single battery in a battery
string managed by the iBOX.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
Remarks
Set this parameter based
on the battery parameter
planned by the customer.
-
Obtain the battery capacity
from the battery label or
document.
178