Call Home Enable Function; Enabling Call Home Using Fabric Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 62 Configuring Call Home
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 62-13
Select a switch in the Information pane.
Step 4
Check the Duplicate Message Throttle check box.
Step 5
Click the Apply Changes icon.
Step 6

Call Home Enable Function

Once you have configured the contact information, you must enable the Call Home function.

Enabling Call Home Using Fabric Manager

To enable the Call Home function using Fabric Manager, follow these steps:
Select a switch in the Fabric pane.
Step 1
Expand Switches, expand Events, and select Call Home in the Physical Attributes pane.
Step 2
You see the Call Home information in the Information pane.
Click the Control tab.
Step 3
You see the information shown in
Figure 62-14
Select a switch in the Information pane.
Step 4
Check the Enable check box.
Step 5
Click the Apply Changes icon.
Step 6
OL-17256-03, Cisco MDS NX-OS Release 4.x
Call Home Control Tab
Figure 62-14.
Call Home Control Tab
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Call Home Enable Function
62-17