Clear Controllers Lre - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

clear controllers lre

Use the clear controllers lre user EXEC command to reset an Long-Reach Ethernet (LRE) switch
interface or a Cisco LRE customer premises equipment (CPE) device interface.
This command is available only on Catalyst 2950 LRE switches.
Syntax Description
local link
remote link
remote micro
interface-id
Defaults
No default is defined.
Command Modes
User EXEC
Command History Release
12.1(11)YJ
Usage Guidelines
Use this command to reset a questionable local or remote interface.
The clear controllers lre remote micro command is not supported on the Cisco 575 LRE CPE and the
Cisco 576 LRE 997 CPE devices.
Examples
This example shows how to reset the local LRE interfaces on the switch:
Switch> clear controllers lre local link
This example shows how to reset the Cisco 575 LRE, Cisco 576 LRE 997 CPE, and the Cisco 585 LRE
CPE devices connected to the switch:
Switch> clear controllers lre remote link
This example shows how to reset the Cisco 585 LRE CPE micro-controller connected to the switch:
Switch> clear controllers lre remote micro
Related Commands Command
cpe shutdown
shutdown
OL-10102-01
clear controllers lre {local link | remote [link | micro]} interface-id
Reset the LRE interfaces on the switch by resetting the interface.
Reset the LRE interface on the CPE device.
Reset the Cisco 585 CPE device.
(Optional) ID of the switch port.
Modification
This command was introduced.
Description
Disables one or more CPE ports.
Disables a port.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
clear controllers lre
2-41