Cisco Catalyst 2950 Command Reference Manual page 81

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
This example shows how to remove all the dynamic secure addresses learned on a specific interface:
Switch# clear port-security dynamic interface fastethernet0/1
This example shows how to remove all the sticky secure addresses from the address table:
Switch# clear port-security sticky
You can verify that the information was deleted by entering the show port-security privileged EXEC
command.
Related Commands Command
show port-security
switchport port-security
switchport port-security
mac-address mac-address
switchport port-security
value
OL-10102-01
Description
Displays the port security settings for an interface or for the
switch.
Enables port security on an interface.
Configures secure MAC addresses.
maximum Configures a maximum number of secure MAC addresses on a
secure interface.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
clear port-security
2-51