Cisco Catalyst 2950 Command Reference Manual page 322

show controllers ethernet-controller
Table 2-13 LRE Enet Stats on CPE Field Descriptions for LRE and CPE Interfaces (continued)
Field Description
Receive
Broadcast frames The total number of frames successfully received on an interface that are directed to broadcast
addresses.
Pause frames The number of pause frames received on an interface.
Alignment errors The total number of frames received on an interface that have alignment errors.
Collisions and Runts The number of frames that could not be received on an interface because of collisions because the
frame length (in bytes) is too small.
Oversize frames The total number of frames that are the larger than the maximum frame size.
FCS errors The total number of frames received on an interface that have a valid length (in bytes) but do not
have the correct FCS values.
Table 2-14 CPE Fast Ethernet Port Field Descriptions for LRE and CPE Interfaces
Field
Transmit
Bytes
Unicast Frames
Multicast Frames
Broadcast Frames
Dropped Frames
Pause Frames
Collisions Frames
One Collision Frames
Multiple Collisions
Late Collisions
Excessive Collisions
Deferred Frames
Receive
Bytes
Good Bytes
Unicast Frames
Multicast Frames
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-294
Description
The total number of bytes sent on an interface.
The total number of frames sent to unicast addresses.
The total number of frames sent to multicast addresses.
The total number of frames sent to broadcast addresses.
The total number of frames that are not sent.
The number of pause frames sent on an interface.
The total number of frames that are not sent on an interface because of collisions.
The number of frames that are successfully sent on an interface after one collision occurs.
The number of frames that are sent after more than one collision occurs.
After a frame is sent, the number of times that a collision is detected on an interface later than
512 bit times.
The number of frames that could not be sent on an interface because more than 16 collisions
occurs.
The number of frames for which the first transmission attempt on an interface is not successful.
This value excludes frames in collisions.
The total amount of memory (in bytes) used by frames received on an interface, including the
FCS value and the incorrectly formed frames. This value excludes the frame header bits.
The total amount of memory (in bytes) used by frames received on an interface, including the
FCS value and the correctly formed frames. This value excludes the frame header bits.
The total number of frames successfully received on an interface that are directed to unicast
addresses.
The total number of frames successfully received on an interface that are directed to multicast
addresses.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01