Cisco Catalyst 2950 Command Reference Manual page 141

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Examples This example shows how to enable error disable detection for the link-flap error-disable cause:
Switch(config)# errdisable detect cause link-flap
You can verify your settings by entering the show errdisable detect privileged EXEC command.
Related Commands Command
errdisable recovery
show errdisable detect
show interfaces
OL-10102-01
Description
Configures the recovery mechanism variables.
Displays errdisable detection status.
trunk Displays interface status or a list of interfaces in error-disabled
state.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
errdisable detect cause
2-111