Define Interface-Range - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

define interface-range

Use the define interface-range global configuration command to create an interface-range macro. Use
the no form of this command to delete the defined macro.
Syntax Description
macro-name
interface-range
Defaults This command has no default setting.
Command Modes
Global configuration
Command History Release
12.1(6)EA2
Usage Guidelines The macro name is a 32-character maximum character string.
A macro can contain up to five ranges.
All interfaces in a range must be the same type; that is, all Fast Ethernet ports, all Gigabit Ethernet ports,
all EtherChannel ports, or all VLANs, but you can combine multiple interface types in a macro.
When entering the interface-range, use this format:
•
•
Valid values for type and interface:
•
•
•
•
•
VLAN interfaces must have been configured with the interface vlan command (the show
running-config privileged EXEC command displays the configured VLAN interfaces). VLAN
interfaces not displayed by the show running-config command cannot be used in interface-ranges.
OL-10102-01
define interface-range macro-name interface-range
no define interface-range macro-name interface-range
Name of the interface-range macro; up to 32 characters.
Interface range; for valid values for interface ranges, see "Usage Guidelines."
Modification
This command was introduced.
type {first-interface} - {last-interface}
You must add a space between the first interface number and the hyphen when entering an
interface-range. For example, fastethernet0/1 -2 is a valid range; fastethernet0/1-2 is not a valid
range.
vlan vlan-id, where vlan-id is 1 to 4094.
port-channel port-channel-number, where port-channel-number is 1 to 6
fastethernet interface-id
gigabitethernet interface-id
longreachethernet interface-id
Catalyst 2950 and Catalyst 2955 Switch Command Reference
define interface-range
2-79