Cisco Catalyst 2950 Command Reference Manual page 603

Appendix A Catalyst 2955 Alarm Commands
Examples This is an example of output from the show alarm profile command. It displays all ports that are
attached to the configured profiles and defines the alarm options in the profile.
Switch> show alarm profile
alarm profile defaultPort:
Interfaces
et0/5 FastEthernet0/6 FastEthernet0/7 FastEthernet0/8 FastEthernet0/9 FastEthern
et0/10 FastEthernet0/11 FastEthernet0/12 GigabitEthernet0/1 GigabitEthernet0/2
alarm profile teresa:
alarm profile test-profile:
Related Commands Command
alarm profile (global
configuration)
alarm profile (interface
configuration)
OL-10102-01
FastEthernet0/2 FastEthernet0/3 FastEthernet0/4 FastEthern
Alarms 3
Syslog 3, 4
Notifies 3
Relay Major 1, 2
Relay Minor 1, 4
Interfaces FastEthernet0/1
Alarms 1, 2, 3, 4
Syslog 2, 3, 4
Notifies
Relay Major 1
Relay Minor
Interfaces
Alarms
Syslog
Notifies
Relay Major
Relay Minor
Description
Creates an alarm profile containing one or more alarm IDs and alarm
options.
Attaches an alarm profile to an interface.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show alarm profile
A-13