Show Etherchannel - Cisco Catalyst 2950 Command Reference Manual

show etherchannel

Flags:
Timers: H - Hello timer is running.
Local information:
Port
Fa0/3
Age of the port in the current state: 10d:23h:07m:37s
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
GC
Port state
This is an example of output from the show etherchannel 1 summary command:
Switch> show etherchannel 1 summary
Flags:
Group Port-channel
-----+------------+-----------------------------------------------------------
1
This is an example of output from the show etherchannel 1 port command:
Switch> show etherchannel 1 port
Port: Fa0/3
------------
Port state
Channel group = 1
Port-channel
Port index
Flags:
Timers: H - Hello timer is running.
Local information:
Port
Fa0/3
Age of the port in the current state: 10d:23h:13m:21s
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-330
S - Device is sending Slow hello.
A - Device is in Auto mode.
d - PAgP is down.
S - Switching timer is running.
Flags State Timers
dA U1/S1
Port-channels in the group:
----------------------
= 03d:02h:22m:43s
= 1/0
= 0x00000000
= Port-channel Ag-Not-Inuse
D - down P - in port-channel
I - stand-alone s - suspended
R - Layer3 S - Layer2
u - unsuitable for bundling
U - port-channel in use
d - default port
Ports
Po1(SU) Fa0/1(Pd) Fa0/2(P)
Ports in the group:
-------------------
= Down Not-in-Bndl
Mode = Automatic-Sl
= null GC
= 0 Load = 0x00
S - Device is sending Slow hello.
A - Device is in Auto mode.
d - PAgP is down.
S - Switching timer is running.
Flags State Timers
dA U1/S1
Chapter 2
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
1s 0 200
Number of ports = 0
HotStandBy port = null
Gcchange = 0
= 0x00000000 Pseudo port-channel = Po1
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
1s 0 200
Catalyst 2950 and 2955 Cisco IOS Commands
Learning Group
Method Ifindex
Any 0
Learning Group
Method Ifindex
Any 0
0L-10102-01