Vmps Retry - Cisco Catalyst 2950 Command Reference Manual

vmps retry

vmps retry
Use the vmps retry global configuration command to configure the per-server retry count for the VLAN
Query Protocol (VQP) client.
Syntax Description count
Defaults
The default retry count is 3.
Command Modes
Global configuration
Command History Release
12.1(6)EA2
Examples
This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your settings by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Related Commands Command
show vmps
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-548
vmps retry count
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
Modification
This command was introduced.
Description
Displays VQP and VMPS information.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01