Snmp-Server Enable Traps - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

snmp-server enable traps

Use the snmp-server enable traps global configuration command to enable the switch to send Simple
Network Management Protocol (SNMP) notification for various trap types to the network management
system (NMS). Use the no form of this command to return to the default setting.
Syntax Description alarms
bridge
c2900
cluster
config
copy-config
entity
envmon
fan
shutdown
status
supply
temperature
voltage
flash
hsrp
mac-notification
port-security
trap-rate value
rtr
snmp
authentication
coldstart
linkdown
0L-10102-01
snmp-server enable traps [alarms | bridge | c2900 | cluster | config | copy-config | entity |
envmon [fan | shutdown | status | supply | temperature | voltage] | flash | hsrp |
mac-notification | port-security [trap-rate value] | rtr | snmp [authentication | coldstart |
linkdown | linkup | warmstart] | stpx | syslog | vlan-membership | vlancreate | vlandelete |
vtp]
no snmp-server enable traps [alarms | bridge | c2900 | cluster | config | copy-config | entity |
envmon [fan | shutdown | status | supply | temperature | voltage] | flash | hsrp |
mac-notification | port-security [trap-rate ] | rtr | snmp [authentication | coldstart |
linkdown | linkup | warmstart]| stpx | syslog | vlan-membership | vlancreate | vlandelete |
vtp]
(Optional) Enable SNMP alarm traps. This keyword is only available on a
Catalyst 2955 switch.
(Optional) Enable SNMP Spanning Tree Protocol (STP) bridge management
information base (MIB) traps.
(Optional) Enable SNMP configuration traps.
(Optional) Enable cluster traps.
(Optional) Enable SNMP configuration traps.
(Optional) Enable SNMP copy-configuration traps.
(Optional) Enable SNMP entity traps.
(Optional) Enable environmental monitor (EnvMon) MIB.
(Optional) Enable SNMP EnvMon fan traps.
(Optional) Enable SNMP EnvMon monitor shutdown traps.
Optional) Enable SNMP EnvMon monitor status change traps.
(Optional) Enable SNMP power supply traps.
(Optional) Enable SNMP EnvMon temperature traps.
(Optional) Enable SNMP EnvMon voltage traps.
(Optional) Enable SNMP FLASH notifications.
(Optional) Enable Hot Standby Router Protocol (HSRP) traps.
(Optional) Enable MAC address notification traps.
(Optional) Enable port security traps.
(Optional) Set the number of traps per second. The range is 0 to 1000.
(Optional) Enable SNMP Response Time Reporter traps.
(Optional) Enable SNMP traps.
(Optional) Enable SNMP authentication traps.
(Optional) Enable SNMP coldstart traps.
(Optional) Enable SNMP linkdown traps.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
snmp-server enable traps
2-431