Test Relay - Cisco Catalyst 2950 Command Reference Manual

Appendix A Catalyst 2955 Alarm Commands

test relay

Use the test relay privileged EXEC command to turn on or off the relay circuitry.
Using the test command alters the state (on or off) of a relay. Previous states are not saved.
Caution
Command Modes Privileged EXEC
Command History Release
12.1(12c)EA1
Usage Guidelines You can use the test relay privileged EXEC command to check relay circuitry connections to the alert
devices. The command provides a way to test alarm scanners without having to create an alarm
condition.
Examples
This example shows how to turn on the major relay circuitry:
Switch# test relay major on
Related Commands Command
show alarm profile
show alarm settings
show facility-alarm relay
OL-10102-01
test relay {major | minor} {on| off}
Modification
This command was introduced.
Description
Displays all alarm profiles or a specified alarm profile and lists the
interfaces to which each profile is attached.
Displays environmental alarm settings and options.
Displays alarm relays generated on the switch.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
test relay
A-21