Clear Controllers Lre Link Monitor - Cisco Catalyst 2950 Command Reference Manual

clear controllers lre link monitor

clear controllers lre link monitor
Use the clear controllers lre link monitor privileged EXEC command to clear Long-Reach Ethernet
(LRE) link monitor data.
This command is available only on Catalyst 2950 LRE switches.
Syntax Description
interface-id
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.1(11)YJ
Usage Guidelines This command clears all collected link monitor data. New entries are added when a new polling cycle
starts.
Examples This example shows how to clear link monitor data on an LRE port:
Switch# clear controllers lre link monitor longreachethernet0/2
Related Commands Command
link monitor
link monitor logging
link monitor threshold snr
link monitor threshold rserr
show controllers lre link monitor
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-42
clear controllers lre link monitor interface-id
ID of the LRE switch port.
Modification
This command was introduced.
Chapter 2
Description
Enables the LRE link monitor on a port.
Enables link monitor event logging per port.
Sets a signal-to-noise margin for the LRE link monitor.
Sets a Reed-Solomon error threshold for the LRE link monitor.
Displays the LRE link monitor information.
Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01