Cisco Catalyst 2950 Command Reference Manual page 388

show ip igmp snooping
Vlan 1:
--------------------------------------------------------
elected querier is 1.1.1.1
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
operational state
operational version
tcn query pending count
Related Commands Command
ip igmp snooping
show ip igmp snooping
show ip igmp snooping
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-360
IGMP switch querier status
: Enabled
: 2
: 10.1.1.65
: 60
: 10
: 120
: 2
: 10
: Non-Querier
: 2
: 0
Chapter 2
on port Fa8/0/1
Description
Enables and configures IGMP snooping on the switch or on a
VLAN.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
Displays IGMP snooping multicast information for the switch or
for the specified parameter.
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01