Mkdir - Cisco Catalyst 2950 Command Reference Manual

mkdir

mkdir
Use the mkdir boot loader command to create one or more new directories on the specified file system.
Syntax Description
filesystem:
/directory-url
Command Modes Boot loader
Command History Release
12.1(11)YJ
Usage Guidelines Directory names are case sensitive.
Directory names are limited to 45 characters between the slashes (/); the name cannot contain control
characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Examples This example shows how to make a directory called Saved_Configs:
switch: mkdir flash:Saved_Configs
Directory "flash:Saved_Configs" created
This example shows how to make two directories:
switch: mkdir flash:Saved_Configs1 flash:Test
Directory "flash:Saved_Configs1" created
Directory "flash:Test" created
You can verify that the directory was created by entering the dir filesystem: boot loader command.
Related Commands Command
dir
rmdir
Catalyst 2950 and Catalyst 2955 Switch Command Reference
B-16
mkdir filesystem:/directory-url ...
Alias for a flash file system. Use flash: for the system board flash device.
Name of the directories to create. Separate each directory name with a space.
Modification
This command was introduced
Description
Displays a list of files and directories on the specified file system.
Removes one or more directories from the specified file system.
Appendix B Catalyst 2950 and 2955 Switch Boot Loader Commands
OL-10102-01