Show Running-Config Vlan - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show running-config vlan

Use the show running-config vlan privileged EXEC command to display all or a range of
VLAN-related configurations on the switch.
Syntax Description vlan-ids
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(9)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show running-config vlan command:
Switch# show running-config vlan 900-2005
Building configuration...
Current configuration:
!
vlan 107
!
vlan 120
!
vlan 925
!
vlan 1000
end
0L-10102-01
show running-config vlan [vlan-ids] [ | {begin | exclude | include} expression]
(Optional) Display configuration information for a single VLAN identified by
VLAN ID number or a range of VLANs separated by a hyphen. The range is 1 to
4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show running-config vlan
2-399