Type Of Memory - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:

Table of Contents

Using the Command-Line Interface

The Catalyst 2950 and 2955 switches are supported by Cisco IOS software. This chapter describes how

to use the switch command-line interface (CLI) to configure the software features.

For a complete description of the commands that support these features, see

and 2955 Cisco IOS Commands."

references for Cisco IOS Release 12.1 at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/index.htm

For task-oriented configuration steps, see the software configuration guide for this release.

The switches are preconfigured and begin forwarding packets as soon as they are attached to compatible

In this document, IP refers to IP version 4 (IPv4). Layer 3 IP version 6 (IPv6) packets are treated as

non-IP packets.

Type of Memory

The switch flash memory stores the Cisco IOS software image, the startup and private configuration

files, and helper files.

This software release runs on a variety of switches. For a complete list, see the release notes.

C H A P T E R

For more information on Cisco IOS Release 12.1, see the command

Catalyst 2950 and Catalyst 2955 Switch Command Reference

Chapter 2, "Catalyst 2950

Show Quick Links

Table of Contents

Catalyst 2955