Show Alarm Description Port - Cisco Catalyst 2950 Command Reference Manual

Appendix A Catalyst 2955 Alarm Commands

show alarm description port

Use the show alarm description port user EXEC command to display the alarm numbers with the text
description.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(12c)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show alarm description port command. It shows the alarmIDs
and their respective alarm descriptions.
Switch> show alarm description port
1
2
3
4
Related Commands Command
alarm profile (global
configuration)
show alarm profile
OL-10102-01
show alarm description port [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Link Fault
Port Not Forwarding
Port Not Operating
FCS Error Rate exceeds threshold
Description
Creates an alarm profile containing one or more alarm IDs and alarm options.
Displays all alarm profiles or a specified alarm profile and lists the interfaces
to which each profile is attached.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show alarm description port
A-11