Cisco Catalyst 2950 Command Reference Manual page 159

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Examples This example shows how to apply a numbered ACL to an interface:
Switch(config)# interface fastethernet0/1
Switch(config-if)# ip access-group 101 in
You can verify your settings by entering the show access-lists or show ip access-lists privileged EXEC
command.
Related Commands Command
access-list (IP extended)
access-list (IP standard)
deny (access-list configuration)
ip access-list
permit (access-list configuration)
show access-lists
show ip access-lists
OL-10102-01
Description
Defines an extended IP ACL.
Defines a standard IP ACL.
Configures conditions for an IP ACL.
Defines an IP ACL.
Configures conditions for an IP ACL.
Displays ACLs configured on the switch.
Displays IP ACLs configured on the switch.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
ip access-group
2-129