Cisco Catalyst 2950 Command Reference Manual page 243

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Examples This example shows how to configure the default port CoS to 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos cos 4
This example shows how to assign all the packets entering a port to the default port CoS value of 4:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# mls qos cos 4
Switch(config-if)# mls qos cos override
You can verify your settings by entering the show mls qos interface privileged EXEC command.
Related Commands Command
mls qos map
mls qos trust
show mls qos interface
OL-10102-01
Description
Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
Configures the port trust state.
Displays quality of service (QoS) information.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
mls qos cos
2-213