Debug Switch Dhcp - Cisco Catalyst 2950 Command Reference Manual

debug switch dhcp

debug switch dhcp
Use the debug switch dhcp privileged EXEC command to enable debugging of DHCP events. Use the
no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug switch dhcp command is the same as the no debug switch dhcp command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst 2950 and Catalyst 2955 Switch Command Reference
C-20
debug switch dhcp
no debug switch dhcp
Modification
This command was introduced.
Appendix C Catalyst 2950 and 2955 Switch Debug Commands
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
OL-10102-01