Ip Ssh - Cisco Catalyst 2950 Command Reference Manual

ip ssh

ip ssh
Use the ip ssh global configuration command to configure the switch to run Secure Shell (SSH)
version 1 or SSH version 2. Use the no form of this command to return to the default setting.
This command is available only when your switch is running the cryptographic (encrypted) software
image.
Syntax Description
1
2
Defaults The default version is the latest SSH version supported by the SSH client.
Command Modes
Global configuration
Command History Release
12.1(19)EA1
Usage Guidelines If you do not enter this command or if you do not specify a keyword, the SSH server selects the latest
SSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2,
the SSH server selects SSHv2.
The switch supports an SSHv1 or SSHv2 server. It also supports an SSHv1 client. For more information
about the SSH server and the SSH client, see the software configuration guide for this release.
A Rivest, Shamir, and Adelman (RSA) key pair generated by an SSHv1 server can be used by an SSHv2
server, and the reverse.
Examples This example shows how to configure the switch to run SSH version 2:
Switch(config)# ip ssh version 2
You can verify your settings by entering the show ip ssh or show ssh privileged EXEC command.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-160
ip ssh version [1 | 2]
no ip ssh [1 | 2]
(Optional) Configure the switch to run SSH version 1 (SSHv1).
(Optional) Configure the switch to run SSH version 2 (SSHv1).
Modification
This command was introduced.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01