Show Controllers Lre Log - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show controllers lre log

Use the show controllers lre log user EXEC command without keywords to display the history of link,
configuration, and timer events for a specific Long-Reach Ethernet (LRE) port or for all switch LRE
ports. Use this command with keywords to display information about the LRE event log level.
This command is available only on Catalyst 2950 LRE switches.
Syntax Description
level
interface-id
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.1(11)YJ
Usage Guidelines Use the show controllers lre log command without specifying a switch LRE port to display the events
for all LRE switch ports. The time-stamped and sequentially tagged log entries can be helpful in
confirming LRE link drops and configuration changes.
Use the show controllers lre log level command without specifying an LRE switch port to list the log
level for each LRE port on the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers lre log command that shows events on an LRE
interface:
Switch> show controllers lre log longreachethernet0/5
LongReachEthernet0/5: Events Log: ==================================
1d00h: [0]: State RESTART: Got event:Reset
1d00h: [1]: State MODEZERO_APPLIED: Got event:Link Up
1d00h: [2]: State MODEZERO_APPLIED: Got event:Link Down
1d00h: [3]: State PROFILE_APPLIED: Got event:Link Up
0L-10102-01
show controllers lre log [level] [interface-id] [ | {begin | exclude | include} expression]
(Optional) Display information about the LRE event log level.
(Optional) ID of the switch LRE port.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show controllers lre log
2-307