Cisco Catalyst 2950 Command Reference Manual page 258

mvr type
This example shows how to configure a port as an MVR source port:
Switch(config)# interface fastethernet0/3
Switch(config-if)# mvr type source
You can verify your settings by entering the show mvr privileged EXEC command.
Related Commands Command
mvr
mvr immediate
mvr vlan group
show mvr
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-228
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Description
Enables MVR.
Enables the Immediate-Leave feature on an interface.
Configures a receiver port as a member of an MVR group.
Displays MVR global parameters or port parameters.
OL-10102-01