Ip Igmp Snooping Vlan Mrouter - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

ip igmp snooping vlan mrouter

ip igmp snooping vlan mrouter
Use the ip igmp snooping vlan mrouter global configuration command to add a multicast router port
and to configure the multicast router learning method. Use the no form of this command to remove the
configuration.
Syntax Description
vlan vlan-id
interface interface-id
learn {cgmp | pim-dvmrp}
Defaults
The default learning method is pim-dvmrp.
Command Modes
Global configuration
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
The CGMP learning method is useful for controlling traffic in Cisco router environments.
The configured learning method is saved in NVRAM.
Static connections to multicast routers are supported only on switch ports.
Examples
This example shows how to configure an interface as a multicast router port:
Switch(config)# ip igmp snooping vlan 1 mrouter interface fastethernet0/1
This example shows how to specify the multicast router learning method as CGMP:
Switch(config)# no ip igmp snooping vlan 1 mrouter learn cgmp
You can verify your settings by entering the show ip igmp snooping mrouter privileged EXEC
command.
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-156
ip igmp snooping vlan vlan-id mrouter {interface interface-id | learn {cgmp | pim-dvmrp}}
no ip igmp snooping vlan vlan-id mrouter {interface interface-id | learn {cgmp | pim-dvmrp}}
Modification
This command was introduced.
Chapter 2
Specify the VLAN ID. The range is 1 to 4094.
Specify the interface of the member port that is configured to a static
router port.
Specify the multicast router learning method. The keywords have
these meanings:
cgmp—Set the switch to learn multicast router ports by snooping
on Cisco Group Management Protocol (CGMP) packets.
pim-dvmrp—Set the switch to learn multicast router ports by
snooping on IGMP queries and Protocol-Independent
Multicasting-Distance Vector Multicast Routing Protocol
(PIM-DVMRP) packets.
Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents