Show Mac Address-Table Notification - Cisco Catalyst 2950 Command Reference Manual

show mac address-table notification

show mac address-table notification
Use the show mac address-table notification user EXEC command to display parameters for the MAC
notification feature.
Beginning with Cisco IOS Release 12.1(11)EA1, the show mac address-table notification command
Note
replaces the show mac-address-table notification command (with the hyphen).
Syntax Description interface interface-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(6)EA2
12.1(11)EA1
Usage Guidelines
Use the show mac address-table notification command without keywords to display parameters for all
interfaces. Use this command with the interface keyword to display parameters for a specific interface.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table notification command:
Switch> show mac address-table notification
MAC Notification Feature is Disabled on the switch
Related Commands Command
clear mac address-table
mac address-table notification
snmp trap mac-notification
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-374
show mac address-table notification [interface interface-id] [ | {begin | exclude | include}
expression]
(Optional) Specify an interface.
(Optional) Display begins with the line that matches the specified
expression.
(Optional) Display excludes lines that match the specified expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
The show mac-address-table notification command was replaced by the
show mac address-table notification command.
notification
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
Description
Clears the MAC address notification global counters.
Enables the MAC notification feature.
Enables MAC-notification traps on a port.
0L-10102-01