Cisco Catalyst 2950 Command Reference Manual page 308

show cluster
This is an example of output when this command is entered on a member switch:
Switch# show cluster
Member switch for cluster "commander"
This is an example of output when this command is entered on a member switch that is configured as the
standby command switch:
Switch# show cluster
Member switch for cluster "commander"
This is an example of output when this command is entered on the command switch that has lost
connectivity from member 1:
Switch# show cluster
Command switch for cluster "Switch1"
This is an example of output when this command is entered on a member switch that has lost connectivity
with the command switch:
Switch# show cluster
Member switch for cluster "commander"
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-280
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Total number of members:
Status:
Time since last status change:
Redundancy:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
Member number:
Management IP address:
Command switch mac address:
Heartbeat interval:
Heartbeat hold-time:
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
3
192.192.192.192
0000.0c07.ac14
8
80
3 (Standby command switch)
192.192.192.192
0000.0c07.ac14
8
80
7
1 members are unreachable
0 days, 0 hours, 5 minutes
Disabled
8
80
3
<UNKNOWN>
192.192.192.192
0000.0c07.ac14
8
80
0L-10102-01