Cisco Catalyst 2950 Command Reference Manual page 364

show flowcontrol
This is an example of output from the show flowcontrol interface interface-id command:
Switch> show flowcontrol gigabitethernet0/2
Port
---------
Gi0/2
Related Commands Command
flowcontrol
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-336
Send FlowControl Receive FlowControl
admin oper admin
-------- -------- -------- --------
desired off off
Chapter 2
RxPause TxPause
oper
------- -------
off 0
Description
Sets the receive flow-control state for an interface.
Catalyst 2950 and 2955 Cisco IOS Commands
0
0L-10102-01