Boot Private-Config-File - Cisco Catalyst 2950 Command Reference Manual

boot private-config-file

boot private-config-file
Use the boot private-config-file global configuration command to specify the filename that the software
uses to read and write a nonvolatile copy of the private configuration. Use the no form of this command
to return to the default setting.
Syntax Description
filename
Defaults
The default configuration file is private-config.text.
Command Modes Global configuration
Command History Release
12.1(11)EA1
Usage Guidelines Only the software can read and write a copy of the private configuration file. You cannot read, write,
delete, or display a copy of this file.
Filenames are case sensitive.
Examples This example shows how to specify the name of the private configuration file as pconfig:
Switch(config)# boot private-config-file pconfig
Related Commands Command
show boot
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-28
boot private-config-file filename
no boot private-config-file
The name of the private configuration file.
Modification
This command was introduced.
Description
Displays the settings of the boot environment variables.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01