Cisco Catalyst 2950 Command Reference Manual page 32

aaa accounting dot1x
Defaults AAA accounting is disabled.
Command Modes Global configuration
Command History Release
12.1(20)EA2
Usage Guidelines This command requires access to a RADIUS server.
We recommend that you enter the dot1x re-authentication interface configuration command before
Note
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa new model
Switch(config)# aaa accounting dot1x default start-stop group radius
The RADIUS authentication server must be properly configured to accept and log update or watchdog
Note
packets from the AAA client.
Related Commands Command
aaa authentication
dot1x
dot1x reauthentication
dot1x timeout
reauth-period
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-2
Modification
This command was introduced.
Description
Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x.
Enables or disables periodic re-authentication.
Sets the number of seconds between re-authentication attempts.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01