Cisco Catalyst 2950 Command Reference Manual page 366

show interfaces
Though visible in the command-line help strings, the crb, fair-queue, irb, mac-accounting,
Note
precedence, random-detect, rate-limit, and shape options are not supported.
Command Modes
Privileged EXEC
Command History Release
12.0(5.2)WC(1)
12.1(11)YJ
12.1(12c)EA1
12.1(22)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show interfaces accounting command:
Switch# show interfaces accounting
Vlan1
Interface Vlan5 is disabled
FastEthernet0/1
<output truncated>
This is an example of output from the show interfaces capabilities command:
Switch# show interfaces fastethernet0/1 capabilities
FastEthernet0/1
Model:
Type:
Speed:
Duplex:
UDLD:
Trunk encap. type:
Trunk mode:
Channel:
Broadcast suppression: percentage(0-100)
Flowcontrol:
Fast Start:
CoS rewrite:
ToS rewrite:
Inline power:
SPAN:
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-338
Modification
This command was introduced.
The cpe, port port-id, and media keywords were added.
The capabilities keyword was added.
The transceiver and properties keywords were added.
Protocol Pkts In
IP 17950
ARP 8626
Protocol Pkts In
Spanning Tree 2956958
CDP 14301
VTP
DTP 28592
WS-C2950G-48-EI
10/100BaseTX
10,100,auto
half,full,auto
yes
802.1Q
on,off,desirable,nonegotiate
yes
rx-(none),tx-(none)
yes
yes
yes
no
source/destination
Chapter 2
Chars In Pkts Out
2351279 3205
552064 62
Chars In Pkts Out
179218508 34383
5777240 14307
0 0 1408
1572560 0
Catalyst 2950 and 2955 Cisco IOS Commands
Chars Out
411175
3720
Chars Out
2131700
5722418
145908
0
0L-10102-01