Dot1X Multiple-Hosts - Cisco Catalyst 2950 Command Reference Manual

dot1x multiple-hosts

dot1x multiple-hosts
This is an obsolete command.
In past releases, the dot1x multiple-hosts interface configuration command was used to allow multiple
hosts (clients) on an IEEE 802.1x-authorized port.
Command History Release
12.1(6)EA2
12.1(14)EA1
Related Commands Command
dot1x host-mode
show dot1x
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-100
Modification
This command was introduced.
The dot1x multiple-hosts interface configuration command was replaced by
the dot1x host-mode interface configuration command.
Description
Set the IEEE 802.1x host mode on an interface.
Displays IEEE 802.1x statistics, administrative status, and operational status
for the switch or for the specified interface.
Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands
OL-10102-01