Show Cluster - Cisco Catalyst 2950 Command Reference Manual

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Chapter 2
Catalyst 2950 and 2955 Cisco IOS Commands

show cluster

Use the show cluster privileged EXEC command to display the cluster status and a summary of the
cluster to which the switch belongs. This command can be entered on command and member switches.
show cluster [ | {begin | exclude | include} expression]
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.0(5.2)WC(1)
Usage Guidelines
On a member switch, this command displays the identity of the command switch, the switch member
number, and the state of its connectivity with the command switch.
On a command switch, this command displays the cluster name and the total number of members. It also
shows the cluster status and time since the status changed. If redundancy is enabled, it displays the
primary and secondary command-switch information.
If you enter this command on a switch that is not a cluster member, the error message
cluster member
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output when this command is entered on the active command switch:
Switch# show cluster
Command switch for cluster "Switch1"
0L-10102-01
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
appears.
Total number of members:
Status:
Time since last status change:
Redundancy:
Standby command switch: Member 1
Standby Group:
Standby Group Number:
Heartbeat interval:
Heartbeat hold-time:
Extended discovery hop count:
7
1 members are unreachable
0 days, 0 hours, 2 minutes
Enabled
Switch1_standby
110
8
80
3
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show cluster
Not a management
2-279

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents