Show Controllers Lre Sequence - Cisco Catalyst 2950 Command Reference Manual

show controllers lre sequence

show controllers lre sequence
Use the show controllers lre sequence privileged EXEC command to display the list of sequences, the
profiles that are configured in that sequence, and the downstream and upstream rates of the
corresponding profiles.
This command is available only on Catalyst 2950 LRE switches.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)YJ
Usage Guidelines Use the show controllers lre sequence command to display the list of sequences supported in the
switch. This command displays the system-defined and user-defined sequences.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers lre sequence command on the
Catalyst 2950ST-8 LRE and 2950ST-24 LRE switches:
Switch# show controllers lre sequence
Global Sequence:LRE-SEQ-COMPLETE-REACH
Sequence:LRE-SEQ-COMPLETE-REACH
Catalyst 2950 and Catalyst 2955 Switch Command Reference
2-312
show controllers lre sequence [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Profile Name
--------------
LRE-15
LRE-10
LRE-15-5
LRE-10-5
LRE-8
LRE-7
LRE-15-3
LRE-10-3
LRE-5
LRE-15-1
Chapter 2
Type:System-Configured
Downstream Upstream
Rate(Mbps) Rate(Mbps)
---------- ----------
16.667 18.750
12.500 12.500
16.667 6.250
12.500 6.250
9.375 9.375
8.333 8.333
16.667 3.125
12.500 3.125
6.250 6.250
16.667 1.563
Catalyst 2950 and 2955 Cisco IOS Commands
0L-10102-01